Are you considering a wireless doorbell, but still a little confused about the installation process?
Well, take a deep breath because there’s no need to worry whatsoever. Since there are no wires to deal with, installing a wireless doorbell is easy as can be. In fact, easy installation is one of the main benefits of going with a wireless doorbell over traditional wired options.
In just a few easy steps, your wireless doorbell can be installed, setup, and working like a dream. We’ll go over these simple steps in this guide, so you can install wireless doorbell and have it up and running in no time.
- 1 Step 1 – Identify Entryways and Placement Areas
- 2 Step 2 – Select a Doorbell
- 3 Step 3 – Get to Know Your Doorbell
- 4 Step 4 – Turn the Power On
- 5 Step 5 – Sync the Transmitter and Chime Receiver
- 6 Step 6 – Choose a Chime Sound
- 7 Step 7 – Install the Transmitter and Receiver
- 8 Step 8 – Place the Receiver in Your Home
- 9 Final Step – Test the Doorbell
Step 1 – Identify Entryways and Placement Areas
Before you even begin shopping for a wireless doorbell, let alone thinking about how to install a wireless doorbell, you should first identify where you want the doorbell to be placed. Most homes have more than one entryway, so figure out which ones you want equipped with a wireless doorbell.
Some wireless kits come with multiple transmitters, while others only come with one. So, you may need to pick up additional units if you want to cover more than a door or a two.
Step 2 – Select a Doorbell
Rather than making a spur of the moment purchase, perform some research to compare the pros and cons of various wireless doorbell options. Some have extended ranges of 500-1,000 feet, while others have sorter ranges of 50 feet or so. Some look great and are loaded with useful features, while others are outdated in every sense of the word.
When selecting a wireless doorbell, you should take into account the size of your property and all of your needs to make sure you end up with the best wireless doorbell for you. Ultimately, you want a wireless doorbell with the right range, design, and mix of features for your home and lifestyle.
Step 3 – Get to Know Your Doorbell
After you’ve picked out a wireless doorbell and know where it’s going to go, the next step is simply getting to know the doorbell you’ve chosen. For example, does the transmitter have a cell battery and does it come with mounting hardware? It’s best to whether or not you’ll need additional screws, tape, and so on before you actually begin the installation process.
Step 4 – Turn the Power On
Wireless doorbells are powered by batteries, which usually come included with the kits alongside the screws, double-sided tape, and other installation items. With the batteries in hand, insert them into the transmitter to power it up. If the chime receiver is also battery-powered, insert the correct batteries into the receiver as well.
Step 5 – Sync the Transmitter and Chime Receiver
The next step is syncing the push-button transmitter with the receiver or receivers. To do this, push the chime control button on the receiver of the wireless doorbell you choose and push the chime control button. Then, push the button on the transmitter.
This should sync the receiver with the transmitter. However, different doorbell models have different buttons and syncing procedures, so make sure to read the instructions for your particular model.
Step 6 – Choose a Chime Sound
Now that you have synced the chime receiver with the transmitter, it’s time to select a chime tune. Some wireless doorbells come with over 50 chime options, while others only come with a few. Most wireless doorbells have a chime or music button, allowing you to easily toggle through the chime options and select your favorite one.
Step 7 – Install the Transmitter and Receiver
After completing the steps above and finishing the setup process, it’s time for the wireless doorbell installation. Many people wonder how to install wireless doorbell, but in most cases the process is extremely simple.
Place the transmitter at the location you’ve chosen and simply use the provided double-sided tape or screws to attach it to the exterior wall. The best wireless doorbells come with double-sided tape, screws, and any other materials you may need.
Although the tape will make it even easier to install, if you plan on placing the doorbell transmitter outside where it will be exposed to heat, cold, rain, and wind, it’s best to grab a screwdriver and use the provided screws to secure it in place.
If you’re replacing an outdated hardwired doorbell, you’ll need to first disconnect the power and remove it. Then, you’ll need to use wire nuts and electrical tape to safely cover the exposed wires. After doing this and pushing the wires back into the wall, you can tape or screw the new wireless transmitter to secure it over the hole. That’s really all there is to it!
Many wireless doorbells come with multiple receivers or allow you to connect multiple receivers to the transmitter. However, many others also allow you to connect multiple push-button transmitters to a single receiver. This is great for those with multiple entryways.
Step 8 – Place the Receiver in Your Home
By now, you should have already decided on an ideal location for the receiver, so all you need to do is plug it in. Some of the best wireless doorbells have a specific code to avoid signal interference from neighbors. If the wireless doorbell you’ve chosen has this feature, make sure to go over the instructions to see if the code must be set on the transmitter, receiver, or both.
Final Step – Test the Doorbell
After everything is installed and setup, the final step is simply testing out the system. To do this, all you need to do is press the button on the transmitter and listen to see if the receiver goes off to the chime, melody, or tune you’ve chosen.
If you hear the receiver go off, you’re all done. If it doesn’t, you may need to move the receiver closer to the transmitter to determine whether or not it’s a simple range issue. If it still doesn’t go off, the transmitter may be coded improperly.
You may have come to this page wondering how to fit a doorbell, but as you can see, installing a wireless doorbell is incredibly quick and easy. With a little research and planning, you’ll have your new wireless doorbell installed and working like a charm in no time at all!